Options:
[Options]
>
measuring values per display page.
>
[Options]
the selected line.
>
[Options]
>
[Options]
factory setting
6.1.2.2.
Alarm thresholds
Alarm thresholds can be set for several display parameters. An
audible alarm signal is triggered when the alarm limit is reached.
Calling up the function:
Switching alarm signals on / off, changing alarm thresholds:
1. Select function or data: [▲],
2. Set parameter: [▲],
3. Save changes: [Finished].
> Reset the enabled value to the factory setting: [Standard].
6.1.2.3.
Units
The units used for parameters in configuration menus can be set.
Calling up the function:
Adjustable units
Parameter
Altitude
Pressure
1. Select the line: [▲],
2. Select the unit to be edited: [▲],
3. Confirm the entry: [Finished].
Number of
Lines: Change the number of
→
→
Insert Blank
Lines: Insert the blank line before
→
Delete
Line: Delete the selected line.
→
Factory
Setting: Reset the measurement view to
[▼]
and partly [◄],
Unit
m,
ft
mbar,
hPa
[▼]
→ [Edit].
6 Using the product
[▼]
→ [Edit].
[►]
→ [OK].
[▼]
→ [OK].
47