Table of Contents
Advertisement
DIQ/S 281
Message code
EI4171
EI5171
EI6171
EI7171
ba76226e02
11
Messages
11.1 Explanation of the message codes
The log book contains a list with all the messages from all modules. Each
message consists of message code, date and time. You can obtain more
detailed information by opening the full message text (see section 4.5).
The full message text comes from the component that has triggered the
message. Therefore, these texts are only available from components which are
connected to the system and ready for operation.
If a message text is not available, because the component is not connected to
the system, you can look up the texts of the messages in the operating manual
of the respective component.
The following lists contain the message codes and the related message texts
that are shown on the display. Error messages and info messages are listed
separately.
General explanations on the subjects of messages, message codes and log
book are given in section 4.5 of this system operating manual.
Module code
171
11.1.1 Error messages
Message text
Max. components of this component type exceeded
Danger of system overload
* Check and adapt the components for this type
Component cannot be reached or not present
* Component has been removed from the system, insert component
again
* Connex. to component cut.,
Check sys. installation acc. to op. manual
Incompatible terminal software
* Contact service
Incompatible controller software
* Contact service
03/2023
Component
DIQ/S 281
Messages
141
Advertisement
Table of Contents
