Xylem DIQ/S 281 Operating Manual page 90

Settings/setup
90
Alarm settings
figure 5-7
The sensor number and serial number is displayed in the
column.
3 Select an alarm A01 to AXX to be edited with < >. To set up a
new alarm without entry select in the
<OK>. When a new alarm is set up a list with all sensors appears first.
Alarm links that are already available can be erased or edited (for
editing continue with step 5).
Select sensor for alarm link
figure 5-8
4 To set up a new alarm, select a sensor from the list with < > and
confirm with <OK>. The
Alarm link overview
->
Sensor
Set alarm link
display opens.
DIQ/S 281
Sensor
column. Then confirm with
ba76226e02
03/2023