Settings/Setup; Selecting The Language; Terminal Settings Of The Diq/S 281 - Xylem DIQ/S 281 Operating Manual

Settings/setup

80
5 Settings/setup
5.1

Selecting the language

A list shows all the available system languages.
Einstellungen/Settings
1 Open the
2 Using < > and <OK>, select and confirm the menu item,
Language
.
Language
The
Language
figure 5-1
3 Select a language from the list with < > and confirm with <OK>.
The active language is marked with a checkmark.
4 Switch to the higher menu level with <ESC>.
or:
Switch to the measured value display with <M>.
If the selected system language is not available in a component, all
indications of this component (e.g. sensor, Universal Transmitter,
output module) appear in the standard language, English. To acti-
vate the selected system language for this component, a software
update of the component is required (see section 4.11).
5.2

Terminal settings of the DIQ/S 281

The terminal settings include:
Terminal name

menu with <S>.
display opens.
DIQ/S 281
ba76226e02
03/2023