Viewing Detailed Message Texts - Xylem DIQ/S 281 Operating Manual

Operation
Example:
Message code
II2171
70
The "171" module (Universal Transmitter DIQ/S 281) sends a message with the
short message form "II2".
This is an info message (I) of the type Installation (I) with the type number (2).
The detailed message text of the short form message (II2) can be found in the
log book and in the operating manual of the component that sent it.
The detailed message text in the log book contains a precise
description of the message code and, if required, any further
actions.
The detailed message texts can also be found in the component
operating manuals of the individual components.
The log book shows the current status at the point of time it was
opened. If new messages arrive while a log book is open, these do
not appear in the log book. As usual, you are informed of new
messages by flashing info or error symbols. The current log book
with the new messages can be viewed by closing and reopening the
log book.

4.5.3 Viewing detailed message texts

1 Switch to the measured value display with <M>.
Display/Options
2 Open the
3 Using < > and <OK>, select and open the
system
.
A list of log book entries appears.
4 Using < > and <OK> select and confirm a new log book entry
(unchecked).
The message text with further information on the selected log book
entry appears.
menu with <OK>.
ba76226e02
DIQ/S 281
Log book of entire
03/2023