Activating The Instrument Block - Xylem DIQ/S 281 Operating Manual

Settings/setup
Switching off the
access control
Switching on the
instrument block
84
password can be accepted or changed.
3 Press < > to select an user right and confirm with <OK>.
If necessary, change the password in the selection dialog and/or save
the password to a connected USB memory.
4 Note passwords.
For reasons of safety the administrator password at least should be
saved in such a way that it can be accessed in an emergency.
5 Press < > to select the
<OK>.
A security prompt opens.
6 Using < >, select
The settings are adopted.
Extended access control
The
The current passwords are visible.
Viewer
The user right is active.
1 Press <OK> to open the
The password query is displayed.
2 Enter and confirm the administrator password with < > and
<OK>.
Einstellungen/Settings
3 Open the
Deactivate the access control.
Take over the setting.

5.3.2 Activating the instrument block

Device lock
With the function
against unauthorized operating bus also against unauthorized reading of the
current measured values. By activating the instrument block the password for
viewing the measured values is activated.
After a selected interval without user entries, the system is automatically
blocked. The display shows only the IQ S
1 Call up the access control (see section 5.3.1).
2 Press < > to select the
<OK>.
A checkmark appears next to the function.
Apply settings
OK
and confirm with <OK>.
window is still open.
Display/Options Change user rights
/
menu with <S>.
you can protect the Universal Transmitter no only
N
ENSOR ET
Device lock
DIQ/S 281
function and confirm with
menu.
logo.
function and confirm with
ba76226e02
03/2023