Table of Contents
Advertisement
DIQ/S 281
Mounting the
contact base
ba76226e02
5
6
figure 3-2
Mounting the contact base (variant 1)
5
Contact base
6
Tapping screws
7
Countersunk screws
Only IQ Sensor Net products may be used in the IQ Sensor Net.
4
Attach the contact base (pos. 5 in figure 3-2) on the front MIQ module
with the two plastic tapping screws (pos. 6).
5
On the front MIQ module, remove the two countersunk screws (pos. 7
in figure 3-2) and swing open the module lid.
03/2023
7
Installation
19
Advertisement
Table of Contents
