Relay Action - Xylem DIQ/S 281 Operating Manual

DIQ/S 281
ba76226e02
Function
No function
System monitoring
Sensor monitoring
Limit indicator
Frequency controller
Pulse-width output
Cleaning
Manual control
Alarm contact
8 Make the settings for the relay outputs with < > and <OK>.
The settings comprise the relay action (see section 6.6.1) and sensor
dependent settings.
9 Using < > and <OK>, highlight and confirm
The new settings are stored.
As soon as a function was selected for a relay output, you can select a relay
action (see section 6.6.1).

6.6.1 Relay action

The following actions of the relay can be defined in the
Settings
Open
Close
Preferably set up the relay output as normally closed for monitoring
functions (
03/2023
Description
The relay output is not used.
see section 6.6.2
see section 6.6.3
see section 6.6.4
see section 6.6.5
see section 6.6.6
see section 6.6.7
see section 6.6.8
see section 6.6.9
Explanations
The relay should open on every event.
The relay should close on every event.
ActionOpen
).
Outputs
Save and quit
.
Action
setting:
109