Table of Contents
Advertisement
DIQ/S 281
Function
Error events
ba76226e02
Fixed current value
6.7.3
Fixed current value
The
instruments connected to the outputs: output different current values to the out-
put and, while doing so, check the behavior of the connected instrument.
Setting
Current output
Inom
The settings for other functions in the
example,
current value
6.8
Checking the condition of the outputs
This function provides a simple overview of the conditions of all outputs of the
combination output module (see section 4.7).
For the relays, the displayed condition is
For the current outputs, the current value present at the outputs is displayed.
6.9
Behavior of linked outputs
6.9.1 Behavior in case of error
For linked relay outputs or current outputs, you can determine the behavior of
the outputs in case of errors.
Depending on the use of the output, the behavior in case of errors is set in the
following menus:
Output
Frequency controller
Pulse-width output
Recorder
The specified behavior occurs with the following events or conditions:
03/2023
function can be used to test the operativeness of the
Selection/Values
Fixed current
value
0 ... 20 mA
PID controller
Recorder
and
is carried out.
Menu
Frequency with error
Error pulse width
Current with error
Explanation
Save and quit
Using
amperage that was input as
is output.
The nominal amperage that is
output.
Current output
are retained while the
open
closed
or
.
(see section 6.6.5)
(see section 6.6.6)
(see section 6.7.1)
Outputs
, the nominal
Inom
menu as, for
Fixed
125
Advertisement
Table of Contents
