DIQ/S 281
ba76226e02
7
Attach the prepared MIQ module to the lid of the back MIQ module. At
the same time, ensure that the two clips on the front MIQ module click
into place in the lid of the back MIQ module. Subsequently, tighten the
two screws (pos. 8 in figure 3-3).
10
figure 3-5
Closing the enclosure (variant 1)
10 Countersunk screws
8
Close the lid of the front MIQ module and fix it with the two countersunk
screws (pos. 10 in figure 3-5).
03/2023
Installation
21