Setting The Current Outputs - Xylem DIQ/S 281 Operating Manual

DIQ/S 281
ba76226e02
6.7

Setting the current outputs

1 Call up the measured value display with <M>.
2 Open the
3 Using < >, highlight the menu item,
and confirm with <OK>. The
appears.
4 Using < >, highlight the
5 Using < >, highlight a line for a current output (Cx) in the column
Feature
. Confirm with <OK>.
Settings of outputs and links
The
6 Using < >, highlight the menu item,
with <OK>.
figure 6-16
7 Select and confirm a function with < > and <OK>.
Function
No function
Recorder
PID controller
Fixed current value
8 Make the settings for the current output with < > and <OK>.
03/2023
Einstellungen/Settings
Settings of outputs and links
Settings of outputs and links
Settings
The current output is not used.
see section 6.7.1
see section 6.7.2
see section 6.7.3
menu with <S>.
Settings of outputs and links
Feature
column. Confirm with <OK>.
display opens.
Current output
Outputs
,
display
, and confirm
119