Table of Contents
Advertisement
Figure 22. Removing the system cover
Installing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1
Align the tabs on the system cover with the guide slots on the system.
2
Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latch
locks into place.
3
Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.
Safety
instructions.
Installing and removing system components
73
Advertisement
Table of Contents
