Table of Contents
Advertisement
Introduction
Overview
Background Diagnostics
Network Administration Center System Administration and Maintenance Guide Product release 2
This guide consists of two main sections: NAC Maintenance and
Administration programs, and NAC error messages.
The NAC Maintenance and Administration program section is also
separated into three chapters. These chapters provide information on
shutting down the system, restarting the system, backing up the customer
database on tape, restoring the database, configuring the NAC hardware,
and changing the database configuration.
The NAC error messages section lists the operating and task errors that can
be generated during the NAC operation.
Background diagnostic programs are run regularly on the NAC.
Bootable SSID
The NAC operating system tape contains a bootable Standalone System
Interactive Diagnostics (SSID) kernel for the MVME167 processor. This
allows the installer to boot the SSID kernel when booting from the Release
2 operating system tape.
The following procedure is used to boot this system from tape:
1
Boot the NAC.
2
Press {Break} at the prompt, Autoboot in Progress...To abort hit
[Break].
3
Type bo 0,40,test167
1-1
Advertisement
Table of Contents
