Table of Contents
Advertisement
Configuration of NAC System (View Only)
Press c and {ENTER} on the main menu to access the Configure NAC
System submenu, shown in Figure 3-5. This provides options to view the
port assignments, network configurations, and system parameters. The
information is for display purposes only and cannot be changed.
Figure 3-5
Configure NAC System submenu
Configure NAC System
Use up and down arrows to move among menu items and press
Port Assignment
Position the cursor bar over the "Port Assignment (View Only)" option and
press {ENTER}. The NAC 2 Communication Port Assignment screen,
shown in Figure 3-6, appears.
This screen reflects the actual number of MVME332XT Serial I/O card
ports detected on the system during the boot-up phase of installation. This
value matches the Number of Ports Found field in the Current Options
Display screen (described in this chapter). When an MVME332XT card is
either added or removed after the NAC is installed, the "I/O Ports
Reconfiguration on System Restart" option (described in this chapter)
should be enabled through 'maint' to run the auto-detect mechanism.
Network Administration Center System Administration and Maintenance Guide Product release 2
Maintenance and administration programs: system running 3-9
1.
Port Assignment (View Only)
2.
Network Definition (View Only)
3.
System Parameters (View Only)
4.
Exit
ENTER to make a selection
Advertisement
Table of Contents
