Northern Telecom NAC User Manual page 46

4-18 Maintenance and administration programs: system shutdown
553-4011-510 Standard 1.0 November 1994
Save changes and exit
Saves the changes and returns the system to the Configure NAC
System submenu.
PF1=Select no command
Removes the Commands pop-up window from the screen.
PF2=Options
Displays a list of valid entries for the fields.
PF2=Remove options pop-up
Removes the Options pop-up window from the screen.
Remove=Delete record
Deletes an entry from the screen.
Remove=Erase field
Removes the contents of a field.
FIELDS
Node Addr
Specifies the three-digit network address assigned to the switch at
installation.
Node Name
Specifies the descriptive name assigned to the node.
Short Name
Specifies the abbreviated name for the node.
Time Zone
Specifies the difference between the time at the nodal site and the NAC
site. The value must be between –12.0 and +12.0 in 0.5 hour units. For
example, if the NAC site is in New York, and the nodal site is in Los
Angeles, appears as the time zone because there are three hours
-3.0
difference between Eastern Time and Pacific Time. If the NAC site is in
Los Angeles and the nodal site is in New York, the entry would be
Connection Baud
Specifies the baud rate for the network link connection.
Connection Port
Specifies the network link of the NAC to node connection.
.
3.0