Table of Contents
Advertisement
Configure NAC System
Press c and {ENTER} on the main menu to access the Configure NAC
System submenu, shown in Figure 4-7. This submenu provides access to
assign ports, configure the network, and set system parameters.
Figure 4-7
Configure NAC System submenu
Configure NAC System
Use up and down arrows to move among menu items and press
Port Assignment
Position the cursor bar over the "Port Assignment" option and press
{ENTER}. The NAC 2 Communication Port Assignment screen, shown in
Figure 4-8, appears.
This screen reflects the actual number of MVME332XT Serial I/O card
ports detected on the system during the boot-up phase of installation. This
value matches the Number of Ports Found field in the Current Options
Display screen (described in this chapter). When an MVME332XT card is
either added or removed after the NAC is installed, the "I/O Ports
Reconfiguration on System Restart" option (described in this chapter)
should be enabled through maint to run the auto-detect mechanism.
Network Administration Center System Administration and Maintenance Guide Product release 2
Maintenance and administration programs: system shutdown 4-13
1.
Port Assignment
2.
Network Definition
3.
System Parameters
4.
Exit
ENTER to make a selection
Advertisement
Table of Contents
