Northern Telecom NAC User Manual page 213

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Write of selected data record failed"
libquery
A database error has occurred.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
"Writing to a named pipe (with descriptor %d) failed"
ft_server
A system error has occurred.
Repeat the operation. If the problem reoccurs, then shut down and restart the system. Repeat
the operation again. If the problem still persists, call your Northern Telecom service
representative.
"Writing to a named pipe (with descriptor %d) failed"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Wrong Switch State"
naclink
This message represents a transient state for which no user intervention is required.
The system will try to force a logout and restart the logon sequence.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Uquery_util.c
ft_server.c
fxfr.c
Ucmis_opdu.c
NAC error messages 5-163