Northern Telecom NAC User Manual page 193

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"The named output pipe is full"
ft_server
The named pipe is at its limit.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"The named pipe [%s] cannot be removed"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"The named pipe [%s] cannot be removed"
ft_server
A system error has occurred.
Repeat the operation. If the problem reoccurs, then shut down and restart the system. Repeat
the operation again. If the problem persists, call your Northern Telecom service representative.
"The named pipe [%s] does not exist nor be created"
ft_server
A system error has occurred.
If this is a recently installed system, reinstall the system and make sure there are no installation
errors. Otherwise, shut down and restart the system. Repeat the relevant operation. If the
problem still persists, call your Northern Telecom service representative.
"The named pipe [%s] does not exist nor be created"
ft_server
A system error has occurred.
If this is a recently installed system, reinstall the system and make sure there are no installation
errors. Otherwise, shut down and restart the system. Repeat the relevant operation. If the
problem still persists, call your Northern Telecom service representative.
"The Network Message is too big"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"The Network Message was detected"
ft_server
This is an informative message for which no user intervention is necessary.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
fxfr.c
fxfr.c
ft_server.c
ft_server.c
fxfr.c
fxfr.c
ft_server.c
NAC error messages 5-143