Representative If The Problem Persists - Northern Telecom NAC User Manual

Network administration center
Hide thumbs Also See for NAC:
Table of Contents

Advertisement

Table 5-1
Fatal error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Remote op program name too long"
cquery
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"Report definition is invalid"
crptgen
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"request for graph failed"
crptgen
Either insufficient memory was installed in the system, irregular system activities occurred, or
a system error was detected.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"request for report failed"
crptgen
Either insufficient memory was installed in the system, irregular system activities occurred, or
a system error was detected.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"Seek failed"
libquery
An internal system variable has reached an illegal state.
Ignore this message if this is an isolated incident. Call your Northern Telecom service

representative if the problem persists.

"segmentation or IOT trap"
signal processor
A system error has occurred.
If there are other recent messages relevant to this problem or scenario check their meaning.
If these indicate other serious problems then call your Northern Telecom service representative.
Otherwise, no action is required.
"Selection table setup failure [%d] ––: table: %s"
<Task>
A database error occurred while trying to read from the table (%s). Check the error message
for the <Task> and <Module> reporting the problem. Contact your Northern Telecom service
representative for assistance.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Ucquery.c
Urptgen.c
Urpt_mapaif.c
Urpt_mapaif.c
Uquery_util.c
Usignal.c
<Module>
NAC error messages 5-39

Advertisement

Table of Contents
loading

Table of Contents