Northern Telecom NAC User Manual page 151

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"gfield failed for default language – English used"
sys_rpts
A database error has occurred. If there is trouble accessing the definition for the default
language, then the default language of English will be used.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"gfield failed for supervisor's language"
sys_rpts
A database error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Gfield failure [%d] –– table: %s, field: %s"
cquery
A database error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"grgen abnormal termination caused by signal %d"
crptgen
A system error has occurred.
Perform the print function again. Call your Northern Telecom service representative if the
problem persists.
"grgen is deferring sanity a second time"
crptgen
The report is taking a long time.
If this problem persists for the current report, call your Northern Telecom service representative.
"Grouping key specification error"
cquery
An internal system variable has reached an illegal state.
Call your Northern Telecom service representative.
"Halt request received – shutdown starting"
MAPA Controller
System is shutting down.
No user action is required. If this message is received without a shutdown being done via MAINT
then call your Northern Telecom service representative.
"I_AM_DONE from static program %s (pid %d)"
MAPA Controller
A static program is terminating.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Urpt_init.c
Urpt_init.c
Ucquery.c
Ugrgen.c
Ugrgen.c
Ucquery.c
ctl_main.c
ctl_main.c
NAC error messages 5-101