Northern Telecom NAC User Manual page 183

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"stime fails"
MAPA Controller
Informative only.
No user action is required.
"String not found [Type %d, Number %d]"
LangServer
A task has attempted to access a string in the User Language Database but the database does
not contain a string with this type (%d) and number (%d). This can be caused by a corruption
of the database. Shut down and restart the system. If the problem persists, this suggests instead
that the problem is due to a software error and your Northern Telecom service representative
should be contacted.
"string too long [%d]"
libmapa
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Successfully started nquery on node addr %d"
cquery
Informative only.
No user action is required. Ignore this message if this is an isolated incident. Call your Northern
Telecom service representative if the problem persists.
"system error:Arg list too long"
liberror
Informative only.
Another error message will follow that will indicate the task that is generating the error. If the
description of the error message that follows instructs you to call your Northern Telecom service
representative, report this system error message together with the error message that follows.
"system error:Argument too large"
liberror
Informative only.
Another error message will follow that will indicate the task that is generating the error. If the
description of the error message that follows instructs you to call your Northern Telecom service
representative, report this system error message together with the error message that follows.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
ctl_utils.c
lang.c
mapa_lib.c
Ucquery.c
ACD_err.c
ACD_err.c
NAC error messages 5-133