Table of Contents
Advertisement
5-168 NAC error messages
Table 5-3
Informational error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Opened the named pipe [%s] with descriptor %d"
Ipath
Indicates the pipe is opened with the specified descriptor.
Informative; no user intervention is necessary.
"Opened the named pipe [%s] with descriptor %d"
ft_server
Informative.
No user intervention is necessary.
"out–of–sync count expired"
linkread
The out of sync from MAX is not received.
The task should begin its recovery process by itself. If the problem persists, call your Northern
Telecom service representative.
"previous frame not received"
linkread
A frame transmission is missing.
The task should begin its recovery process by itself. If the problem persists, call your Northern
Telecom service representative.
"read error on DEVICE port"
linkread
Linkreader has a problem on the port defined.
Check the review on hardware configuration to ensure the port is defined properly. If the port
is correct, call your Northern Telecom service representative.
"Received unexpected record %d (!= %d) in block %d"
ft_server
An unexpected record is received in block specified.
The task should start its correction to the record by itself; no user intervention is necessary.
"received xfr status: %d, error = %d"
display
Information on xfr.
No user intervention is required.
"Receiving file #%d [%s] of size %lu (bytes); dsc. %d/%d"
ft_server
File transfer information.
Informative; no user intervention is necessary.
553-4011-510 Standard 1.0 November 1994
Module
fxfr.c
fxfr.c
Umprotocol.c
Umprotocol.c
Umprotocol.c
fxfr.c
Unet_mgr.c
fxfr.c
Advertisement
Table of Contents
