Table of Contents
Advertisement
4-8 Maintenance and administration programs: system shutdown
Figure 4-5
Inserting a cassette into the NAC tape drive
Installation
tape
Notch points down
Write enabled
553-4011-510 Standard 1.0 November 1994
Arrow
points in
Protected
Restore Customer Data from Tape
Press r and {ENTER} to restore the customer data from a back-up tape. A
message appears asking that the back-up tape be inserted into the tape
drive.
If the hardware configuration of the NAC has changed since the back-up
tape was made, use the "Configure NAC System" option from the main
menu after the customer data is restored.
Note: The system checks the backup tape for the following
information on the system for which it was produced: software release,
options, and hardware platform. The restore is aborted if this
information does not match that of the current system. If the backup
was created while the system was running, a database check is
performed to verify the integrity of the database.
Tape drive
light
Write
protect
tab
Eject button
Tape drive
Advertisement
Table of Contents
