Warning Error Messages - Northern Telecom NAC User Manual

Warning error messages

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Acckey failed for nODELIST table. (rc = %d)"
mpsa
The key access failed for the nODELIST database table. The return code (rc) of the acckey call
that failed is shown. Try the operation again. If the problem occurs again, contact your Northern
Telecom service representative.
"acckey failed for profile table – defaults used"
sys_rpts
A database error has occurred. The miscellaneous options will be defaulted.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"acckey failed for spvids table – defaults used"
sys_rpts
A database error has occurred. The supervisor's language cannot be retrieved.
The requested system report will be generated in the customer default language. If the problem
persists, call your Northern Telecom service representative.
"Agent statistic group not supported at the CMIS"
cquery
The feature is not supported in NAC.
No recovery procedure is required.
"Already Logged on–Logging Out"
naclink
A system variable has reached an illegal state.
The system should begin its recovery process and will start again without intervention. If the
problem reoccurs then shut down the system and call your Northern Telecom service
representative.
Network Administration Center System Administration and Maintenance Guide Product release 2
Note: Some of the warning error messages shown here contain one or
more of the following character strings: %d, %s, %c, or %lx.
The message as it appears on the screen replaces these character strings
with the appropriate information. The string, %d, represents a number.
The string, %s, represents the name of either a database table or task.
The string, %c, represents a single character. The string, %lx,
represents a hexadecimal number.
Module
Upa_ntwk.c
Urpt_init.c
Urpt_init.c
Ucquery.c
Ucmis_opdu.c
NAC error messages 5-55