Table of Contents
Advertisement
5-70 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Cannot set threshold at %s"
naclink
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Cannot set threshold at %s"
naclink
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Cannot set threshold at %s"
naclink
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Cannot start nquery on node_addr %d on attempt %d"
cquery
A system error has occurred.
Try the operation again. If the problem persists, call your Northern Telecom service
representative.
"Cannot store selection keys: out of memory"
cquery
Either insufficient memory was installed on the system, irregular system activities occurred, or
a software error was detected.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then shut down the system and call your Northern Telecom service
representative.
"Cannot turn on threshold checking with descriptor %d"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
553-4011-510 Standard 1.0 November 1994
Module
Ucmis_sub.c
Uapp_rcv.c
Uapp_send.c
Ucquery.c
Ucquery.c
fxfr.c
Advertisement
Table of Contents
