Table of Contents
Advertisement
5-104 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Invalid argument [%s] given"
ft_server
A system error has occurred.
Repeat the operation. If the problem reoccurs, then shut down and restart the system. Repeat
the operation again. If the problem still persists, call your Northern Telecom service
representative.
"Invalid attribute name in video attribute file"
lib_usrif
Installation failed or the site has an improper version of the release material.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
"Invalid background color specification"
lib_usrif
There is a problem in the Video Attributes file for this device. A background color has been
specified which is invalid. The user interface will continue reading the file. If you experience
problems, specify a different terminal type. This should be reported to your Northern Telecom
service representative.
"Invalid CC message rcvd –––> %d"
nccsend
An internal variable has reached an illegal state.
Call your Northern Telecom service representative.
"Invalid character following '^'"
lib_usrif
An internal variable has reached an illegal state.
Call your Northern Telecom service representative.
"Invalid criteria logical key number [%d]"
cquery
A system variable has reached an illegal state.
Repeat the operation. If the problem persists, then call your Northern Telecom service
representative.
"Invalid Datagram return result"
naclink
This message represents a transient error.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
553-4011-510 Standard 1.0 November 1994
Module
fxfr.c
pscreen.c
pscreen.c
Unccsend.c
uicommon.c
Ucquery.c
Uapp_error.c
Advertisement
Table of Contents
