5-54 NAC error messages
Table 5-1
Fatal error messages
Error Message
Task
Explanation
Error Recovery Procedure
"write fails"
MAPA Client
Either insufficient memory was installed in the system, irregular system activities occurred, or
a system error was detected.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"write to pipe with no read process"
signal processor
A system error has occurred.
Look for other recent messages relevant to this program or scenario and check their meaning.
If these indicate other serious problems then call your Northern Telecom service representative.
Otherwise, no action is required.
553-4011-510 Standard 1.0 November 1994
Module
client.c
Usignal.c