Northern Telecom NAC User Manual page 156

5-106 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Invalid Language Number"
LangServer
An internal system variable has reached an illegal state. The task should begin its recovery
process and will start again without user intervention. If the problem reoccurs, shut down the
system and contact your Northern Telecom service representative.
"invalid message type id from APP–in pipe"
naclink
A system error has occurred.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
"Invalid monochrome attribute specification"
lib_usrif
There is a problem in the Video Attributes file for this device. The file contains a monochrome
attribute which is unknown to the user interface. The user interface will continue reading the file.
If you experience problems, specify a different terminal type. This should be reported to your
Northern Telecom service representative.
"Invalid node unit specified"
sys_rpts
A system variable has reached an illegal state.
The system should begin its recovery process and will start again without user intervention. If
the problem reoccurs, then shut down the system and call your Northern Telecom service
representative.
"Invalid node unit %d specified [%d]"
cquery
A system error has occurred.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
"Invalid period definition table"
crptgen
A database error has occurred.
Check your materials (that is, version number and system type). If they appear to be correct,
reinstall the NAC release. If the error message returns, call your Northern Telecom service
representative.
"invalid polling interval %ld"
libmapa
A system error has occurred.
Call your Northern Telecom service representative.
553-4011-510 Standard 1.0 November 1994
Module
lang.c
Ucom_hdl.c
pscreen.c
Urpt_utils.c
Ucquery.c
Uquery_tf.c
mapa_lib.c