Table of Contents
Advertisement
5-62 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Cannot add error information to report information file"
sys_rpts
A system error has occurred.
Ignore this message if this is an isolated incident, otherwise shut down and restart the system.
"Cannot add nodal information to report information file"
sys_rpts
A system error has occurred.
Ignore this message if this is an isolated incident, otherwise shut down and restart the system.
"Cannot add node: too many nodes"
cquery
The system defined limit is exceeded.
Call your Northern Telecom service representative.
"Cannot add records past system defined limit."
LangServer
The system defined limit is exceeded.
Call your Northern Telecom service representative.
"Cannot allocate name_table: out of memory"
cquery
Either insufficient memory was installed in the system, irregular system activities occurred, or
a software error was detected.
Call your Northern Telecom service representative.
"Cannot change name of a STATIC program %s"
MAPA Controller
A system variable has reached an illegal state.
Call your Northern Telecom service representative.
"Cannot change task name – out of memory"
MAPA Controller
Either insufficient memory was installed in the system, irregular system activities occurred, or
a software error was detected.
Call your Northern Telecom service representative.
"Cannot close file %s"
cquery
A system error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
If the problem persists, call your Northern Telecom service representative.
553-4011-510 Standard 1.0 November 1994
Module
Urpt_utils.c
Urpt_utils.c
Ucquery.c
lang.c
Ucquery.c
ctl_utils.c
ctl_utils.c
Ucquery.c
Advertisement
Table of Contents
