Northern Telecom NAC User Manual page 117

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"cannot open network port"
linkread
Network Link will not come up.
Reinstall the NAC system. Call your Northern Telecom service representative if the problem
persists.
"Cannot open nquery file %s"
cquery
A system error has occurred.
Call your Northern Telecom service representative.
"Cannot open pipe %s [%d]"
cquery
A system error has occurred.
Call your Northern Telecom service representative.
"Cannot open pipe %s for task NCCRCV"
nccrcv
A system error has occurred.
Call your Northern Telecom service representative.
"Cannot open pipe: %s"
display
A system error has occurred.
Call your Northern Telecom service representative.
"cannot open pipe_list"
MAPA Controller
A system error has occurred.
Call your Northern Telecom service representative.
"Cannot open %s pipe for sending msgs to node"
nccsend
A system error has occurred.
Call your Northern Telecom service representative.
"Cannot open %s"
display
A file/directory was not found.
If the system is newly installed, reinstall the system and make sure there are no installation
errors. Otherwise, shut down and restart the system. If the problem persists, call your Northern
Telecom service representative.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Ulinkread.c
Ucquery.c
Ucquery.c
Unccrcv.c
Unet_mgr.c
ctl_main.c
Unccsend.c
Usupmsg.c
NAC error messages 5-67