Table of Contents
Advertisement
5-38 NAC error messages
Table 5-1
Fatal error messages
Error Message
Task
Explanation
Error Recovery Procedure
"read error on pipe to MAINTENANCE CONSOLE"
naclink
A system error has occurred.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"read failed on pipe to MAINTENANCE CONSOLE"
naclink
A system error has occurred. An earlier Warning Error Message should clarify the reason for
this error.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"Read failed"
libquery
A database error has occurred.
Reinstall the hardware and software if there were errors during the most recent
installation/upgrade of the NAC system. If there were no errors during the installation/upgrade,
or if the problem persists after reinstallation, call your Northern Telecom service representative.
"Record location failure [%d] –– table: %s, loc: %d"
replay
A database error has occurred.
Reinstall the hardware and software if there were errors during the most recent
installation/upgrade of the NAC system. If there were no errors during the installation/upgrade,
or if the problem persists after reinstallation, call your Northern Telecom service representative.
"Remote Login Port Configuration Error"
display
A system error has occurred.
Review the Remote Login Supervisor Configuration Menu and make sure they are defined
correctly. If they are, shut down the system and run "Test I/O Ports" to ensure the hardware
connections are correct. If the problem persists, call your Northern Telecom service
representative.
"Remote op arguments too long"
cquery
A system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
553-4011-510 Standard 1.0 November 1994
Module
Ucom_hdl.c
Ucom_hdl.c
Uquery_util.c
Ureplay.c
Uremote.c
Ucquery.c
Advertisement
Table of Contents
