Table of Contents
Advertisement
2.
Note: Be sure to issue a break sequence before the boot process completes.
Break sequences can vary, depending on the console type. Some management
consoles have specific "Break" keys on their keyboards; other require a key
sequence to issue a break (for example,
for your management console, see the PC/terminal documentation.
Logging in to the Command Line Software
Regardless of the command line software used (ARN monitor or Technician
Interface) the procedures to log in are identical.
To log in to the command line:
1.
2.
114200-E Rev 00
While the router is running the EZ-Install procedure, issue a break
sequence from the management console.
The ARN monitor login prompt appears.
Type the following command (noting the use of an uppercase "M") at the
login prompt and press the Return key:
Manager
The Technician Interface or ARN monitor command line prompt appears. You
are now using a command line interface to the router.
To use the netboot, directed netboot, or the local boot option, go to one of
the following sections that describes the procedure you want to use:
•
"Continuing with Netboot" on
•
"Continuing with Directed Netboot" on
•
"Continuing with Local Boot (the Quick-Start Procedure)" on
or
). For the break sequence
Cntrl-C
~ #
page 2-8
page 2-10
Starting the ARN
page 2-13
2-7
Advertisement
Table of Contents
