Source Menu; Connector Selection; Source Configure - Barco F90–W13 User Manual

6. SOURCE MENU

About the Source menu
This menu is used to select, review and configure sources into the projector.
Overview
•

Connector selection

• Source configure
6.1 Connector selection
About
Source / {Source}
Click on the relevant input connector icon to swap or activate the source.
The icon for the active source is highlighted.
The list of displayed sources can be adjusted to include other connectors.
The default selection of connectors displayed is:
• DVI 1
• DVI 2
• DP 1
• DP 2
• HDBaseT
• HDMI
• SDI
6.2 Source configure
About
Source / Configure
This submenu allows users to review and configure advanced source settings.
Source / Configure / Edit source
The Edit source submenu enables configuration of source composition.
Edit Source will be available for future SW upgrade.
The connectors can be arranged in 5 different compositions:
• Single
• Side-by-side
• Top-bottom
• 2x2 window
• 4 columns
Additional logical inputs can be added.
The default selection of connectors displayed is:
601–0400–00 F90–W13 18/08/2016
6. Source menu
41