Sync Fast/Slow Adjustment (Only Inputs 3,4,5,6); What Can Be Done; How To Setup The Sync Function; Note - Barco R9002380 Owner's Manual

Sync Fast/Slow Adjustment (only inputs 3,4,5,6)

What can be done ?

The sync function is used to minimize horizontal jittering or tearing at the top to the displayed image.
The sync slow/fast function is only available for RGB sources.

How to setup the sync function ?

To change the Sync setting, handle as follow :
1. Push the cursor keys é or ê to select Sync (menu 1)
2. Press ENTER to toggle between FAST and SLOW .

Note

SYNC is normally used in the SLOW position. The FAST position is used to compensate for unsteady sync pulses from older video
playback equipment.
PICTURE TUNING
COLOR BALANCE
DECODING : EBU
PORT2 : VIDEO
PEAKING : OFF
LINE DOUBLER : ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 1

Decoding

What can be done ?
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the normal American IRE standard or via the European EBU standard.

How to set up ?

To change the decoding setting, handle as follow :
1. Push the cursor key é or ê to select to select Decoding (menu 1).
2. Press ENTER to toggle between IRE and EBU.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PORT 2 : VIDEO
PEAKING : OFF
LINE DOUBLER : ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 1

Port 2 : Video or S-Video

What can be done ?
Port 2 can be used as a Video or S-Video input.

How to configure port 2 ?

To change the Port 2 setting, handle as follow :
1. Push the cursor key é or ê to select Port 2 (menu 1).
2. Press ENTER to toggle between Video and S-Video.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
PEAKING : OFF
LINE DOUBLER : ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
5976066 BARCOCINE 7 07022000
menu 1
Random Access Adjustment Mode
7-5