196 Managing Alarms
Configuring Countermeasures
You can enable WSS Software to use countermeasures against rogues. Countermeasures consist of packets that interfere
with a client's ability to use the rogue. Countermeasures are disabled by default. When you enable them, all devices of
interest that are not in the known devices list become viable targets for countermeasures.
Countermeasures are enabled on an individual radio profile basis. When you create a radio profile, you can apply it to
specified service profiles or to individual radios. The following example shows how to create a radio profile, apply the
radio profile to AP radios, then enable countermeasures in the radio profile.
To enable countermeasures
1
Click on the Configuration option in the main WLAN Management Software tool bar.
2
In the Organizer panel, click the plus sign next to the WSS.
3
Click the plus sign next to Wireless.
4
Select Radio Profiles.
NN47250-101 (320665-G Version 02.01)