Nortel 2350 User Manual page 149

19 Click Next. The Capacity Planning for Data page appears.
20 To calculate AP placement and configuration based on both coverage and on capacity, enable Use
Capacity Calculation for Data. Otherwise, click Next and go to
By default, WLAN Management Software performs only the coverage calculation. If you enable the Use
Capacity Calculation for Data option, WLAN Management Software performs both calculations.
21 In the Per Station Throughput list, specify the throughput (combined transmit and receive) in kilobits per
second (Kbps) for a station.
22 In the Expected Station Count list, specify the number of clients you expect to be in the coverage area.
23 In the Station Oversubscription Ratio list, select the ratio for the average transmit behavior of the stations.
The station oversubscription ratio is the ratio of active clients compared to total clients. For example, the
ratio 5:1 indicates that, statistically, 20 percent of the clients are active at any given time.
Nortel WLAN Management Software 2300 Series User Guide
Using RF Planning 149
step 24.