Nortel 2350 User Manual page 59

Perform the following to configure RADIUS servers:
• Configure RADIUS server attributes in WMS
• Configure attributes on the RADIUS server
Configure RADIUS Server in WMS
To configure RADIUS in WMS, define RADIUS server groups (named sets of RADIUS servers). You must create at
least one server group. RADIUS server groups can authenticate administrators and network users.
To configure the RADIUS server in WMS
1
Select Configuration on the toolbar.
2
In the Organizer panel, expand the WSS on which you are configuring the service.
3
Expand AAA, then select RADIUS.
4
In the Task List panel, select Create RADIUS Server.
The Create RADIUS Server wizard appears.
5
Type the name, IP address, and key. Click Next.
WLAN Management Software suggests the name of a server group in which to place the server. The
server group is required because AAA rules refer to server groups, not to individual servers.
Nortel WLAN Management Software 2300 Series User Guide
Configuring Wireless Services 59