Nortel 2350 User Manual page 118

118 Using Auto-RF with Modelling
6
In the Rate [Mb/s] list for each technology, select the average desired association rate for typical clients in
this coverage area.
7
For 802.11g, to prevent the association of 802.11b clients to any radio in this coverage area, select
Exclude 802.11b clients. To allow 802.11b clients to associate to radios in the coverage area, clear
Exclude 802.11b clients.
Note.
radio detects a beacon from an 802.11b network, the radio enters protection mode
to protect against interference.
8
Click Next. The Floor Properties page appears.
9
To change the ceiling height, specify the new height in the Height of the Ceiling box.
10 To change the height where APs are mounted, specify the new mounting height in the AP Placement
Height box.
NN47250-101 (320665-G Version 02.01)
Even when association of 802.11b clients is disabled, if an 802.11b/g