Nortel 2350 User Manual page 122

122 Using Auto-RF with Modelling
24 Click Next. The Capacity Planning for Voice page appears.
25 To calculate AP placement and configuration based on both coverage and capacity for voice over IP,
enable Plan for Voice over IP. Otherwise, click Next and go to
By default, WLAN Management Software performs only the coverage calculation. If you enable the Plan
for Voice over IP option, WLAN Management Software performs both calculations.
26 In the Active Call Bandwidth list, specify the amount of bandwidth in kilobits per second (Kbps) that you
expect for each call.
27 In the Active Handsets per AP list, specify the number of voice over IP phones that you want each AP to
handle.
28 In the Expected Handset Count list, specify the number of voice over IP phones you expect to be in the
coverage area.
29 In the Handset Oversubscription Ratio list, select the ratio for the average transmit behavior of the voice
over IP phones.
The handset oversubscription ratio is the ratio of active handsets compared to total handsets. For example,
the ratio 4:1 indicates that, statistically, 25 percent of the voice over IP phones are active at any given
time.
30 Click Next. The Mobility Domain, Radio Profile, Wiring Closet(s) page appears.
NN47250-101 (320665-G Version 02.01)
step 30