Distribute System Images; Using The Image Repository - Nortel 2350 User Manual

164 Managing and Monitoring Your Network
• HTTPS—By default, HTTPS is enabled. TCP port 443 is used for secure access by Web View, the Nortel
Web-based application for managing a WSS.
Note.
WMS communications also use HTTPS, but WMS is not affected by the HTTPS
configuration on the WSS. For WMS, HTTPS is always enabled and listens to port 8889.
• Telnet—By default, Telnet is disabled. You can enable Telnet for unencrypted access to the CLI.
• SSH—By default, SSH is enabled. You can use SSH for encrypted access to the CLI.
• SNMP—By default, SNMP is disabled. You can configure SNMP community strings and User Security Model
(USM) users, notification profiles, and notification targets.
• Logging—The system log provides event information for monitoring and troubleshooting. You can send the log
information to a local data buffer on a WSS, to the console, to a Telnet session, and to a configured set of syslog
servers.
• Tracing—Tracing allows you to review diagnostic information for debugging WSS Software. Tracing allows you to
review messages about the status of a specific area of WSS Software.
• Time zone and summertime settings—You can configure the system time and date statically. You also can configure
WSS Software to offset the time by an additional hour for daylight savings time or similar summertime period.
To manage services on a WSS
1
Select the Configuration tool bar option.
2
In the Organizer panel, click the plus sign next to the WSS.
3
Click the plus sign next to System.
4
Select Management Services. The management services and their settings appear in the Content panel.
5
Use the Content panel and Task List options to modify settings.
(For information about the management options, see the "Viewing and Changing Management Settings"
section in the "Configuring WSS System Parameters" chapter of the
2300 Series Reference

Distribute System Images

You can use WLAN Management Software to upgrade or downgrade the system image (WSS Software software) on
WSSs. System images include switch software and AP software.

Using the Image Repository

Use the image repository to add or delete WSS system images. The image file is checked and its version is verified when
added to the image repository. Images are stored in the WMS_installation_directory\images\dp directory.
To add a system image
1
Select the Devices tool bar option.
NN47250-101 (320665-G Version 02.01)
Guide.)
Nortel WLAN Management Software