Generating An Ekahau Site Survey Work Order - Nortel 2350 User Manual

• In WLAN Management Software—Optimize to correct attenuation factors.
The chapter guides you through the tasks you need to do in WMS. For information about tasks you need to do in the
Ekahau Site Survey tool, please refer to the ESS tool's documentation.
The site survey example in this chapter is based on the RF coverage area that follows. For information about displaying
RF coverage areas, refer to

Generating an Ekahau Site Survey Work Order

The site survey order contains the locations and MAC addresses of the APs for use when conducting a site survey, and
also provides a JPEG image of the floor.
To generate a site survey order
1
Display the floor plan in the Content panel.
2
In the Task List panel, click RF Planning.
3
Under Site Survey, click Report. The Site Survey Order Generation dialog is displayed.
"Displaying the RF Coverage Area" on page
Nortel WLAN Management Software 2300 Series User Guide
Optimizing a Network Plan 203
210.