Nortel 2350 User Manual page 28

28 Getting Started
By default, a username and password are not required to access WMS Services from WMS client. You
can configure user accounts for administrative, provisioning, and monitoring access. (Refer to
Management Software Access Control" on page
2
Configure the following options by clicking Server Settings on the left of the browser window:
• Enter the desired HTTPS Server Port in the HTTPS Server Port field. The HTTPS Server
Port is the port on which WMS Services listens for requests from WMS client.
• Enter the desired HTTP Server Port in the SNMP. The SNMP Server Port is the port on which
SNMP traps are received. Select the trap type from which you want WMS Services to receive
WSSs, SNMPv1 or SNMPv3.
Note.
configure WMS Services as a notification target (trap receiver).
Note.
switches until you save the network plan.
NN47250-101 (320665-G Version 02.01)
On each switch in the network plan, you must enable notifications and
WMS Services does not start listening for SNMP notifications from
29.)
"WLAN