Define Site Information - Nortel 2350 User Manual

Grouping lines is not always recommended. For example, grouping lines into one object does not work well with
polylines. Grouped polylines are recognized by the planning tool in WMS as a single, monolithic obstacle. This causes
incorrect results when viewing RF coverage.
Note.
Objects must not be RF Obstacles or Groups before Clean Layout is performed.
After you import the file into WMS, you have the opportunity to remove any unnecessary objects overlooked during
your initial preparation of the floor drawings. To do this, you can use the Clean Layout feature and other editing tools in
the Building wizard.
For more information about how to prepare the AutoCAD files for WMS. refer to the Nortel WMS Reference Manual.

Define Site Information

You define your site with information about your campus, buildings, and floors. In addition, you describe the attenuation
characteristics of the location and specify the traffic engineering needs (bandwidth and reliability) of the users.
Note.
only when you click Finish, not when you click Next. Changes are not persistently
saved until you save the network plan.
WLAN Management Software commits your work into the network plan
Nortel WLAN Management Software 2300 Series User Guide
Using RF Planning 131