Nortel 2350 User Manual page 141

layers but after performing a site-survey the walls were found to be similar in material construction, it is better to put
them in one layer. In this way, the RF attenuation assignment can be performed in one step.
This section shows how to select and draw objects and convert them into RF obstacles. WMS preserves the layers
defined in a CAD drawing.
Table 1 provides some common AutoCAD layer terminology.
Table 1: Common AutoCAD Layer Terminology
AutoCAD Layer Name
glaz
scol
p-fixt
p-part
ext
int
Commonly Represents...
windows
steel columns
bathroom
bathroom stall partitions
exterior
interior
Nortel WLAN Management Software 2300 Series User Guide
Using RF Planning 141