Nortel 2350 User Manual page 134

134 Using RF Planning
6
In the Country Code list, select the country where the network is to be deployed.
Note.
7
Select the Open this plan? checkbox to open the plan in WLAN Management Software.
8
Click Create to create the new network plan.
To add site information
1
Select the RF Planning tool bar option.
2
In the Organizer panel, click the name of the network plan.
3
Select Create Site in the Task List panel. The Create Site wizard, a series of dialog boxes, prompts you for
information about the new site.
4
In the Site Name box, type a name for the site (1 to 80 alphanumeric characters, with no spaces or tabs),
and click Next.
5
To change the Country Code, select the country where the network is to be deployed in the Country Code
list.
6
In the Channel Set (802.11b/g) list, select the set of operating channels for any 802.11b/g AP radios you
plan to use (if different from the default), and click Next.
7
In the Number Of Buildings box, specify how many buildings are in your site, and click Finish.
When you specify the number of buildings a site contains, WLAN Management Software creates each
building using the default settings. You can edit the buildings WLAN Management Software creates or
you can add new buildings.
NN47250-101 (320665-G Version 02.01)
You must select a country code before continuing.