Using Rf Measurements From An Ekahau Site Survey - Nortel 2350 User Manual

202 Optimizing a Network Plan
To import RF measurements from APs
1
Select the RF Planning option in the main WLAN Management Software tool bar.
2
Display the floor plan in the Content panel.
3
In the Task List panel, click RF Planning.
4
Under Site Survey, click Import Measurement. The Import RF Measurements wizard is displayed.
5
Select Yes next to Network.
6
Click Next.
The import progress is displayed. When the import is done, click Finish to accept the changes and close
the wizard.
After you apply the network RF measurements, you correct the attenuation factors for the floor. Go to
RF Coverage Model" on page 208

Using RF Measurements from an Ekahau Site Survey

RF measurements come from a site survey file generated by the Ekahau Site Survey tool. Choose one of the following to
perform a site survey:
• In WLAN Management Software—View your RF coverage area.
• In WLAN Management Software—Generate a site survey work order, specifying the area you want to survey. A
JPEG (.jpeg, .jpg) file is generated.
• Import the generated JPEG file into the Ekahau Site Survey tool.
• Set the scale of the drawing.
• Perform the site survey. Walk through the area, taking measurements with the tool.
• Save the RF measurements in the Ekahau Site Survey tool to a file in comma-separated values (csv) format.
• In WLAN Management Software—Import the csv file containing the RF measurements into WMS.
NN47250-101 (320665-G Version 02.01)
for information about this topic.
"Optimizing the