Using Auto-Rf With Modelling; What Is Auto-Rf With Modelling; Add Site Information - Nortel 2350 User Manual

Using Auto-RF with Modelling

What Is Auto-RF with Modelling? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Add Site Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Insert RF Obstacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Create Your RF Coverage Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
What's Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
What Is Auto-RF with Modelling?
Auto-RF with modelling is a technique you can use to configure and implement your network. This technique builds on
the Auto-RF method. You will still use Auto-RF (auto tuning) to adjust power and channel settings, which provides RF
signals to the coverage area. After using Auto-RF, provide modelling information about your geographic location to
enhance the auto tuning feature.
To use this technique, complete the tasks described in
1
Add site information (buildings and floors) or import a floor drawing.
2
Add RF obstacles (optional).
3
Add an RF coverage area.
By providing some information about your buildings and floors, WMS gains the information to better visualize the
network topology and support improved monitoring.
To learn more about the benefits of Auto-RF with modelling, refer to
Add Site Information
Note.
obtained do not compensate nor account for obstacles and characteristics
typically associated with outdoor environments. Nortel does not warrant or support
any outdoor deployments or installations of the WLAN 2300 system implemented
with the use of this tool.
By adding minimal information about your buildings and floors at your site, you support improved monitoring for your
network. Manually add building and floor information or import a floor plan. For information about importing a floor
plan, refer to "Import a Floor Plan" on page
"Using Auto-RF" on page
The RF Planning software does not support outdoor installations. Results
136.
Nortel WLAN Management Software 2300 Series User Guide
101then complete the following steps:
"Auto-RF with Modelling" on page
109
37.