Import A Floor Plan - Nortel 2350 User Manual

136 Using RF Planning
3
In the Floor Name box, type the name of the floor (1 to 60 alphanumeric characters, with no spaces or
tabs), and click Next.
4
To change the default attenuation for radios, type the number of dB in the 802.11a (dB) box or 802.11b/g
(dB) box.
5
In the Height of the Ceiling box, type the number of feet or meters from the floor to the ceiling (1 to 1000
feet or meters).
6
Click Finish to close the wizard.

Import a Floor Plan

Import existing floor plans into WMS. The file can be in one of the AutoCAD DXF, AutoCAD DWG, JPEG, or GIF
formats.
Note.
remove unnecessary objects and layers; then save them in .dxf format. For more
information about how to modify AutoCAD files, refer to
Drawings" on page
To import a floor drawing
1
In the Organizer panel, click on the plus sign next to the building to expand it, then click on the name of
the floor for which you are importing the drawing. An empty floor layout appears in the Content panel.
2
In the Task List panel, under RF Planning, select Import Floor Layout. Browse to the file you wish to
import, then click Finish. The imported drawing is displayed in the Content panel.
NN47250-101 (320665-G Version 02.01)
Nortel recommends that you modify the AutoCAD files from AutoCAD to
130.
"Prepare the Floor