Intrusion Detection System (Ids) Alarms; Denial Of Service (Dos) Alarms - Nortel 2350 User Manual

188 Managing Alarms
Each bar in the graph shows the alarms that are generated by a specific WSS in the network plan, depicted
in the following screen
2
To view a table of all alarms in WMS, click the Details button in the Top 5 Sources of Alarms section.
Performing this action produces the same effect as clicking the show table icon.

Intrusion Detection System (IDS) Alarms

WLAN Management Software generates alarms when network intrusion events are detected, such as when rogue APs
appear on the network, and when clients associate with the rogue APs. SNMP notifications must be enabled on the
WSSs in order for alarms to appear in WLAN Management Software.
To view IDS alarms
1
To view IDS alarms in chart format, click the chart icon at the bottom left corner of the IDS Alarms
section of the WMS screen.
2
To view IDS alarms in table format, click the table icon at the bottom left corner of the IDS Alarms
section of the WMS screen.
3
To view a table of all alarms in WMS, click Details at the bottom of the IDS Alarms section of the WMS
screen. Performing this action produces the same effect as clicking the show table icon.

Denial of Service (DoS) Alarms

WLAN Management Software generates alarms when attempts at Denial of Service attacks are detected on the network.
SNMP notifications must be enabled on the WSSs in order for alarms to appear in WLAN Management Software.
To view DoS alarms
1
To view DoS alarms in chart format, click the chart icon at the bottom left corner of the DoS Alarms
section of the WMS screen.
NN47250-101 (320665-G Version 02.01)