Nortel 2350 User Manual page 132

132 Using RF Planning
To create a network plan
1
Connect to a host running WLAN Management Software Services. When you start WLAN Management
Software, the WLAN Management Software main window and the WLAN Management Software
Services Connection dialog box appear.
2
In the WMS Services Connection dialog box, enter the IP address of a host running WMS Services,
optionally enter a user name and password, and click Next.
If the WMS Service is installed on the same machine as the one you are using to run WLAN Management
Software, enter 127.0.0.1 as the IP address. This is a standard IP loopback address.
3
After a connection is established to the specified WMS Services host, select Services > Plan
Management. The WMS Services Plan Management page is displayed in a browser window.
4
In the left-hand column of the page, click New Plan. The New Plan page is displayed.
NN47250-101 (320665-G Version 02.01)